MOAT - Manufacture

step 1

choose the model

M series by MOAT Manufacture

M . 6

M . 4

M . 2

M.6

Length overall: 15.00m
Beam maximum: 5.60m
Draft @ full load: ± 0.70m
Height from waterline: ± 3.45 m
Displacement @ full load: 32.5 t
Sleeping room: 6 persons
Capacity overall: 12 persons
Head room inside: 2.20m
Living area space: 56m2
Bow deck space: 16.5m2
Stern deck space: 10m2
CE design category: D

M.4 - NEW DFS 2016

Length overall: 12.00m
Beam maximum: 4.50m
Draft @ full load: ± 0.60m
Height from waterline: ± 3.45 m
Displacement @ full load: 19 t
Sleeping room: 6 persons
Capacity overall: 8 persons
Head room inside: 2.20m
Living area space: 36m2
Bow deck space: 9.5m2
Stern deck space: 6m2
CE design category: D

M.2

Length overall: 8.00m
Beam maximum: 3.20m
Draft @ full load: ± 0.50m
Height from waterline: ± 2.95 m
Displacement @ full load: 7.5 t
Sleeping room: 4 persons
Capacity overall: 6 persons
Head room inside: 2.10m
Living area space: 18m2
Bow deck space: 4m2
Stern deck space: 2m2
CE design category: D

MOAT series by Kees Westerbeek

Shiphouse

Lodge

Cube

Shiphouse

Length overall: 15.00m
Beam maximum: 5.60m
Draft @ full load: ± 0.70m
Height from waterline: ± 5.25 m
Displacement @ full load: 32.5 t
Sleeping room: 6 persons
Capacity overall: 12 persons
Head room inside: 2.20m
Living area space: 53m2
Bow deck space: 18m2
Stern deck space: 10m2
CE design category: D

Lodge

Length overall: 10.50m
Beam maximum: 3.80m
Draft @ full load: ± 0.55m
Height from waterline: ± 3.95 m
Displacement @ full load: 14 t
Sleeping room: 4 persons
Capacity overall: 8 persons
Head room inside: 2.25m
Living area space: 22m2
Bow deck space: 10m2
Stern deck space: 3.6m2
CE design category: D

Cube

Length overall: 10.50m
Beam maximum: 3.80m
Draft @ full load: ± 0.55m
Height from waterline: ± 2.95 m
Displacement @ full load: 14 t
Sleeping room: 4 persons
Capacity overall: 8 persons
Head room inside: 2.10m
Living area space: 22m2
Bow deck space: 10m2
Stern deck space: 3.6m2
CE design category: D
step 2

static or dynamic

STATIC - a version intended for long stationing in one place without any propulsion system. Special hulls are floating in the water yet they are pre-equipped with shore installations. Depending on situation it can be easily pushed or towed by a tugboat to any place required.

DYNAMIC - a version with fully adapted propulsion system to give you appropriate performance and independence of moving anywhere you want when necessary. Innovative, aerodynamic hulls are designed to a specific purpose of providing smooth and comfort cruising.

step 3

choose the hull

Aluminium Catamaran

  • 8m x 3.2m, 12.5m x 4.5m, 15m x 5.5m
  • arine grade aluminium alloy AL5083 H111, #5mm thickness; thoroughly welded
  • Both pontoons subdivided by watertight bulkhead compartments every 2 metres
  • Hull fitted with stiffeners, frames and keel
  • Stern prepared for the outboard engines
  • Bow and stern thruster tunnels fitted
  • ALUMINIUM TRIMARAN (OPTIONAL)

Steel Monohull

  • 8m x 3.2m, 12.5m x 4.5m, 15m x 5.5m
  • Marine grade steel alloy sheet #6mm
  • Diverse profiles are formed and laser cut
  • Reinforced decks’ frame with 5mm steel sheet
  • Service hatch to the propulsion system
  • Hull fitted with diverse frames and a keel
  • Bow and stern thruster tunnels fitted
  • Hempel conservation and paint system

Concrete Platform

  • 8m x 3.2m, 12.5m x 4.5m, 15m x 5.5m
  • Watertight ferroconcrete 70 MPa made in accordance to the EU norm EN206-1
  • Reinforcement: hot- dip galvanised steel rods or stainless steel rods of 16 mm
  • FIlling: watertight polystyrene with water absorption 2% and density 35kg/m3
  • Displacement: 0.56 kN/m2
  • Stiff joints between the pontoons 800 KN
step 4

choose the layout

step 5

choose the engine

Outboard

Yamaha 9.9 hp

Engine Type Two- Cylinder
Displacement 212 cc
Prop Shaft Horsepower 9.9 HP @ 5500 rpm
Fuel/ Induction System SOHC
Alternator Output 6 Amp
Starting System Electric
Engine Oil Capacity 0.8 L
Full Throttle RPM Range 5000-6000
Average consumption 1.6 L/ h
Maximum speed 10 km/ h

Yamaha 25 HP

Engine Type 4-Stroke, two - Cylinder
Displacement 498 cc
Prop Shaft Horsepower 25 HP @ 5500 rpm
Fuel/ Induction System SOHC
Alternator Output 13.5 Amp
Starting System Electric
Engine Oil Capacity 1.6 L
Full Throttle RPM Range 5000-6000
Average consumption 3.5 L/ h
Maximum speed 13 km/ h

Inboard

Vetus M4.35 - 33 HP

Engine Type Four- Cylinder
Displacement 1500 cc
Prop Shaft Horsepower 32 HP @ 3000 rpm
Fuel/ Induction System Indirect cooling
Alternator Output 12 Volt - 110 A
Starting System Electric
Engine Oil Capacity Naturally aspirated
Full Throttle RPM Range 3000
Average consumption 3 L/ h
Maximum speed 15 km/ h

VETUS M4.55 - 52 HP

Engine Type Four- Cylinder
Displacement 1758 cc
Prop Shaft Horsepower 52 HP @ 3000 rpm
Fuel/ Induction System Indirect cooling
Alternator Output 12 Volt - 110 A
Starting System Electric
Engine Oil Capacity Naturally aspirated
Full Throttle RPM Range 3000
Average consumption 4.5 L/ h
Maximum speed 18 km/ h

E-pod

ELECTRIC POD DRIVE 10 kW

Motor technology Synchronous
Voltage regulator 24 V
Supplied capacity 10 kW
Starting System Electric
Full Throttle RPM Range 1800
PMS permanent magnet synchronous
Required battery capacity 24 kWh
Maximum speed 11 km/ h
step 6

customization

50+ exterior paint RAL colours.

CE certified hull range ( all materials).

Handcrafted furniture made of marine plywood.

MIG, TIG, ARC - TUV certified welding.

Teak, PVC or Flexiteak flooring.

Choice of quality upholstery fabrics.

Wide range of multimedia and smart systems.

Handmade interior decorations.

Exterior and interior custom design.

Final step

Contact us.

 

Welcome to the MOAT Manufacture® website. By browsing and using this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern MOAT Manufacture® relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website. The term ‘MOAT Manufacture®’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is Warsaw, Poland. The term ‘you’ refers to the user or viewer of our website. The use of this website is subject to the following terms of use:

  • This website contains material which is owned by or licensed to us. This material includes, but is not limited to, the design, layout, look, appearance and graphics. Reproduction is prohibited other than in accordance with the copyright notice, which forms part of these terms and conditions.
  • The content of the pages of this website is for your general information and use only. It is subject to change without notice.
  • Your use of any information or materials on this website is entirely at your own risk, for which we shall not be liable. It shall be your own responsibility to ensure that any products, services or information available through this website meet your specific requirements.
  • Neither we nor any third parties provide any warranty or guarantee as to the accuracy, timeliness, performance, completeness or suitability of the information and materials found or offered on this website for any particular purpose. You acknowledge that such information and materials may contain inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law.
  • All trademarks reproduced in this website, which are not the property of, or licensed to the operator, are acknowledged on the website.
  • Unauthorised use of this website may give rise to a claim for damages and/or be a criminal offence.
  • From time to time, this website may also include links to other websites. These links are provided for your convenience to provide further information. They do not signify that we endorse the website(s). We have no responsibility for the content of the linked website(s).
  • You also agree not to adapt, alter or create a derivative work from any content.
  • For the avoidance of doubt any use of content which is not described above requires the prior written consent of MOAT Manufacture®, including for the reproduction of content in a book or industrial purpose, or commercial purpose not described above.
  • The names, images and logos identifying MOAT Manufacture®, MOAT Manufacture Ltd and/or Marek Jankowski or third parties and their products and services are subject to copyright, design rights and trademarks of MOAT Manufacture, MOAT Manufacture Ltd and/or Marek Jankowski and/or third parties.
  • Your use of this website and any dispute arising out of such use of the website is subject to the laws of Poland.

© 2016 MOAT Manufacture